и так я дома
Принтер (МФУ) canon mf4120 - не работает (cups его не видит) (сканер, гад такой, работает
)
выкладываю логи мож у кого есть решение (гугление пока ни к чему не привело)
[root@host-2 dev]# usb_printerid
Error: usage: usb_printerid /dev/usb/lp0
[root@host-2 dev]# usb-devices
********
T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=04a9 ProdID=26a3 Rev=01.00
S: Manufacturer=Canon Inc.
S: Product=MF4100
S: SerialNumber=SDF720193497O
C: #Ifs= 2 Cfg#= 1 Atr=c0 MxPwr=2mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=ff Driver=(none)
E: Ad=01(out) Atr=02(Bulk) MxPS= 64*1 Ivl=0ms
E: Ad=82(in) Atr=02(Bulk) MxPS= 64*1 Ivl=0ms
E: Ad=83(in) Atr=03(Interrupt) MxPS= 64*1 Ivl=192ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=07(print) Sub=01 Prot=02 Driver=(none)
E: Ad=04(out) Atr=02(Bulk) MxPS= 64*1 Ivl=0ms
E: Ad=85(in) Atr=02(Bulk) MxPS= 64*1 Ivl=0ms
**************
[root@host-2 dev]# mount
/dev/sda7 on / type ext3 (rw,relatime)
proc on /proc type proc (rw,noexec,nosuid,gid=19)
sysfs on /sys type sysfs (rw)
udevfs on /dev type tmpfs (rw)
devpts on /dev/pts type devpts (rw)
shmfs on /dev/shm type tmpfs (rw)
tmpfs on /tmp type tmpfs (rw,nosuid)
/dev/sda8 on /home type ext3 (rw,nosuid,relatime)
/dev/sda1 on /mnt/sda1 type fuseblk (rw,allow_other,default_permissions,blksize=4096)
/dev/sda5 on /mnt/sda5 type fuseblk (rw,allow_other,default_permissions,blksize=4096)
/dev/sdb1 on /mnt/sdb1 type fuseblk (rw,allow_other,default_permissions,blksize=4096)
/dev/sdb5 on /mnt/sdb5 type fuseblk (rw,allow_other,default_permissions,blksize=4096)
rpc_pipefs on /var/lib/nfs/rpc_pipefs type rpc_pipefs (rw)
none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw)
/dev/sde1 on /media/?????_2 type vfat (rw,nosuid,nodev,uid=500,utf8,shortname=mixed,flush)
none on /proc/bus/usb type usbfs (rw,busmode=0777,devmode=0666)
/dev/sdc1 on /media/My type fuseblk (rw,nosuid,nodev,allow_other,default_permissions,blksize=4096)
/dev/sdc5 on /media/My-Doc type fuseblk (rw,nosuid,nodev,allow_other,default_permissions,blksize=512)
[root@host-2 dev]# ls /proc/bus/usb
001 002 003 004 005 006 007 008 devices
[root@host-2 dev]# scanimage -L
device `pixma:04A926A3_SDF720193497O' is a CANON Canon imageCLASS MF4150 multi-function peripheral
[root@host-2 dev]# sane-find-scanner
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
found USB scanner (vendor=0x04a9 [Canon Inc.], product=0x26a3 [MF4100]) at libusb:002:002
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
[root@host-2 dev]# cat /etc/fstab
proc /proc proc nosuid,noexec,gid=proc 0 0
devpts /dev/pts devpts nosuid,noexec,gid=tty,mode=620 0 0
tmpfs /tmp tmpfs nosuid 0 0
UUID=066ccdeb-dc84-4d14-9924-ece5fac64a7e / ext3 relatime 11
UUID=4b774a32-66e9-40a0-bfda-0aed61b6f332 /home ext3 nosuid,relatime12
UUID=1ffecb87-0479-42e1-bf9c-59064cca601b swap swap defaults 00
UUID=D8F03107F030ECFE /mnt/sda1 ntfs-3g locale=ru_RU.UTF-8,dmask=0,fmask=0111 0 0
UUID=A2E47948E4791FA9 /mnt/sda5 ntfs-3g locale=ru_RU.UTF-8,dmask=0,fmask=0111 0 0
UUID=88503C2C503C237C /mnt/sdb1 ntfs-3g locale=ru_RU.UTF-8,dmask=0,fmask=0111 0 0
UUID=06646797646787EF /mnt/sdb5 ntfs-3g locale=ru_RU.UTF-8,dmask=0,fmask=0111 0 0
/dev/sr0 /media/cdrom udf,iso9660 ro,noauto,user,utf8 0 0
Жду помощи...
